Lohmiller & Company, LLC Terms and Conditions of Sale

(updated 10-26-26)

  1. General: The following terms and conditions of sale (“Terms”) govern Customer’s purchase of any heating, ventilation, air conditioning, electrical and plumbing equipment and building automation control systems, and all related parts, materials and services including software and software-as-a-service (SAAS) offerings from Lohmiller & Company, LLC (“Seller”). If these Terms are first tendered to Customer before Customer tenders a purchase order or similar document to Seller, these Terms are in lieu of any terms later submitted by Customer and Seller rejects all additional or different terms and conditions of Customer, whether confirmatory or otherwise. If Seller tenders these terms after the tender by Customer of other terms, whether as part of a purchase order or otherwise, then Seller’s acceptance of any offer by Customer associated with Customer’s terms is expressly conditioned upon Customer’s acceptance of these Terms exclusively and to the exclusion of any proffered Customer terms or conditions, regardless of whether these Terms contain any terms additional to, or different from, any terms proffered by Customer. Customer’s performance, or acceptance of, or payment for, any products or services from Seller will constitute Customer’s acceptance of these Terms exclusively. If there is a proposal, quotation or an executed written sales agreement in effect between the parties (each a “Sales Agreement”), these Terms form a part thereof. Waiver by Seller of any breach, remedy or provision of the Agreement shall not be construed to be a waiver of any succeeding breach or any other provision or legal remedy of Seller.
  2. Definitions:
    a. “Commissioning” means configuring or verifying the HVAC system operates in accordance with the submittals.
    b. “Goods” means all heating, ventilation, air conditioning, electrical and plumbing equipment, material, parts and supplies, including Parts and the System.
    c. “Customization” means any modification, adaptation, or configuration by Seller of an existing HVAC product, system, or equipment configuration to meet Customer-specific requirements, site conditions, or specifications.
    d. “Parts” means all parts, pieces and materials used in the System including Software a.
    e. “Software” means all software, firmware, and software-as-a-service offerings provided by Seller.
    f. “Start-up” means the start-up procedures described in the manufacturer’s startup literature which confirm that the equipment operates per the manufacturer’s design. Start-up does not include any project-specific programming or adjustments.
    g. “System” means a building automation control system.
    h. “Work” means all work performed by Seller, including technical services and advisement, C&S, System Services and Customization.
    i. “System Services” means the design, installation and/or maintenance of a System.
  3. Payment and Prices:
    a. Orders are not binding upon Seller until accepted by Seller in its sole discretion. Unless the Sales Agreement specifies otherwise, payment is due in accordance with its established account terms with Seller. Unless a Sales Agreement states prices are firm, all prices are estimates only and all items will be billed at prices in effect at time of shipment or performance, as applicable. In the event of any new or increased tariffs imposed by a government agency on the materials used to manufacture the Goods, Seller reserves the right to adjust the price of the Goods by an amount reasonably reflecting the additional tariff costs incurred. Customer may not withhold payment of any amounts due and payable as a set-off of any claim or dispute with Seller. NON-PAYMENT VOIDS ANY WARRANTY.
    b. Credit is extended at the sole discretion of Seller. All orders are subject to credit approval, and Seller reserves the right to require full or partial payment prior to performance. Customer will pay all costs of collection, including reasonable attorney’s fees, in the event of non-payment by Customer of any amounts due. Customer hereby grants to Seller a security interest in all Goods purchased by Customer, to secure any unpaid amounts, and Customer hereby appoints Seller as Customer’s attorney-in-fact to execute and file one or more financing statements to perfect this security interest.
    c. Unless specified otherwise by Seller, prices do not include sales, use, gross receipts, excise or other city, county, state, federal and other taxes. Such taxes will be added to invoices and will be paid by Customer unless Customer provides Seller with an acceptable tax exemption certification.
  4. Delivery:
    a. All Goods shall be shipped at Customer’s risk, FOB Seller’s designated facility – freight prepaid and allowed to the first destination in the continental USA. Seller shall not be liable for loss or damage to merchandise after delivery to the carrier.
    b. Any shipping date provided by Seller is Seller’s best estimate and will not operate to bind Seller to ship or make deliveries on such a date. Shipments are subject to the lead-times of the manufacturer at the time the order is fully released by Customer. Seller shall have the right to deliver any portion of the Goods ordered. If Customer fails to accept delivery of any Good delivered timely then Customer shall be liable for all costs and expenses arising out of such failure, including reasonable storage fees.
    c. Customer must thoroughly inspect the Goods at the time of delivery in the presence of the carrier’s driver, and Customer shall note on the freight bill any shortages, discrepancies or damages of any Good received on the carrier’s receipt. If concealed loss or damage is discovered, Customer must report it to the carrier within 15 days from the date of receipt. Claims for Goods damaged during shipment shall be made by Customer to the carrier and are not covered under the warranty provisions stated herein.
    d. If Seller has been contracted to install a System, Seller shall not be responsible for any loss or damage due to fire, theft, vandalism, and/or malicious mischief once the Parts are delivered to the project site. Customer shall assume all responsibility for any such loss, and Customer shall maintain insurance coverage to protect against such loss.
    e. Seller shall be entitled to an adjustment in price commensurate with any increase in the cost of production or performance and any other losses and expenses incurred by Seller attributable to delays due to Customer, including its delay in approving the submittals. Any deferred delivery request by Customer shall be subject to Seller’s written approval. If such approval is given, Seller shall have the right to charge Customer for the completed portion of the order and to warehouse all completed Goods at Customer’s expense and risk of loss. Seller also reserves the right, at its option, to cancel said uncompleted portion, or to revise its prices and delivery schedules on the portion not completed to reflect its increased costs and expenses attributable to the delay.
  5. Software. All Software is licensed, not sold. Customer acquires no ownership rights in or to the Software. Customer acknowledges that Software may be owned or licensed by third-party licensors (“Licensors”) and is subject to separate license terms, warranties, end user license agreements, or subscription terms (collectively, “License Terms”). Customer agrees: (i) access to and use of the Software may require acceptance of click-through or similar License Terms presented by the Licensor; and (ii) Customer’s use of the Software shall be governed solely by such License Terms. Customer shall comply with all applicable License Terms and shall not: (i) copy, modify, reverse engineer, or create derivative works of the Software except as expressly permitted; or (ii) access or use the Software in any manner that exceeds the scope of the applicable License Terms. For SaaS offerings, access to Software is provided on a subscription basis for the applicable term. Seller does not guarantee uninterrupted or error-free access and shall not be responsible for outages or interruptions attributable to Licensors or third-party providers.
  6. Start-up & Commissioning: For any Commissioning or Start-up services (“C&S”), Customer shall provide timely access to the equipment, required documentation and data, a licensed and certified HVAC contractor, and all ladders, lifts, keys, and other access devices. The installing contractor shall provide all labor, tools, test equipment, refrigerant, supplies, and corrective work required to complete Start-up and make the equipment and system operational in accordance with manufacturer requirements. If any equipment, installation, controls, power, network connectivity, contractor support, or other prerequisite is incomplete when Seller arrives, Seller may terminate the visit and charge Customer a Not Ready Fee and all resulting return-trip, travel, labor, and manufacturer charges. C&S is provided AS IS, without warranties, and does not verify proper installation, suitability, or compliance with plans, specifications, codes, manufacturer requirements, or design intent. Seller is not liable for C&S performed by third parties or for their acts or omissions.
  7. Technical Assistance; No Reliance: Any recommendations, programming assistance, troubleshooting support, drawings, calculations, equipment selections, system configurations, or other technical assistance provided by Seller are advisory only. Unless expressly agreed in writing as part of Seller’s scope of work, Seller does not provide professional engineering or design services and assumes no responsibility for the overall design, integration, or performance of the Goods or System. Seller’s review of plans, specifications, submittals, programming, or installation work shall not constitute an assumption of design responsibility or verification that the Goods comply with project requirements, applicable codes, or manufacturer requirements.
  8. Working Hours and Jobsite: Seller does not provide job or project supervision unless expressly included in Seller’s written scope of work. All Work is provided during Seller’s normal working hours unless otherwise agreed in writing. Customer and Seller shall mutually agree on when Seller’s Work on the project shall begin. Seller agrees to keep the job site clean of debris arising out of its own operations and Work. Customer shall: (i) provide safe and reasonable access to the job site and equipment being serviced; (ii) keep areas adjacent to equipment free of extraneous material; (iii) move any stock, fixtures, walls, partitions, ceilings, enclosures or such other property as may be necessary to perform the specified Work; (iv) notify Seller promptly of any unusual operating conditions; and (v) operate any equipment supplied or serviced hereunder properly and in accordance with instructions. It is the sole and exclusive responsibility of Customer or its designee to verify and approve the submittals for the project and to do so in a timely manner.
  9. Change Orders: Any change to the Goods, Work, drawings, specifications, or schedule constitutes additional work entitling Seller to corresponding price and schedule adjustments. Seller is not required to perform additional work without a written change order signed by both parties. These Terms apply to all change-order work and materials.
  10. Performance Obligations and Excusable Delay:
    a. Seller shall be obligated to furnish only the Goods and Services described in the Sales Agreement and in submittal data (if such data is issued in connection with the order). Acceptance of the Sales Agreement or the submittal data by Customer shall be deemed acceptance by Customer of the suitability of the Goods for the project or location. Unless specifically stated in the Sales Agreement, compliance with any local building codes or other laws or regulations relating to specifications or the location, use, installation or operation of the Goods is the sole responsibility of Customer. If purchasing refrigerant, Customer certifies it has a 608 Refrigerant Certification and it is purchasing the refrigerant only for the eventual use and/or resale to certified technicians. Customer agrees to use and install all equipment in accordance with all local, state and federal requirements, including without limitation, all applicable Regional Efficiency Standards.
    b. Seller shall not be liable for any expense, loss or damage resulting from delay in delivery or prevention of performance caused by: (i) fires, floods, acts of God, strikes, riots, transportation delays, acts or failures to act of any government, pandemics, or the inability to obtain goods from the manufacturer due to events beyond the manufacturer’s control or any other cause beyond the reasonable control of Seller; or (ii) Customer, other contractors on the job, the general or prime contractor, owner, engineer, architect, or any third party beyond the control of Seller (events identified in (i) and (ii) shall be referred to as an “Event”). Seller shall have such additional time for performance as may be reasonably necessary under the circumstances of the Event. Seller shall not be liable for and shall be entitled to receive from Customer all costs and expenses attributable to the acts or omissions of Customer or its contracting parties, including its delay in approving or providing the submittals to Seller timely.
  11. Returns: Customer may not cancel, change or return any order unless agreed to in writing by an authorized representative of Seller, and Seller’s consent may be subject to, in Seller’s sole discretion, a revision in prices and/or delivery dates and Customer’s payment of any costs and expenses incurred by Seller (including stocking and transportation fees) resulting from such approved cancellation, change or return. Customer shall only receive credit for approved returns of standard stock in resalable condition returned within 20 days after the date of delivery to Customer. All returns must be delivered to a point specified by Seller, with freight and other return costs prepaid by Customer. Fabricated or custom material, special orders, non-stocked items, and obsolete or damaged merchandise may not be returned. A handling charge will be assessed on all allowable returned Goods.
  12. Limited Warranties and Disclaimers:
    a. Customer acknowledges that Seller is the distributor, not the manufacturer, of the Goods and as such, Seller makes no warranties with respect to the Goods whatsoever. Seller will provide Customer the express limited warranty provided by each manufacturer, if any, of the Goods. Customer acknowledges that manufacturers’ warranties typically contain sole and exclusive remedies limited to the replacement of non-conforming parts or refund of the purchase price paid for the non-conforming Good. No warranty shall apply to any Good that was altered or was otherwise subject to abuse, neglect or improper use by Customer or improper storage, maintenance or application. “Scratch and Dent” products (i) cannot be returned (all sales are final) and (ii) are sold “AS IS” without any warranties of any kind.
    b. Seller shall provide Customer with a limited warranty on the System Services provided by Seller (excluding the Goods) against material defects in the quality of Seller’s workmanship for a period of one (1) year from completion of the System Services or the acceptance of the System as applicable but in no event shall it exceed eighteen (18) months from delivery of all Parts (“Warranty Period”). In the event the workmanship is determined to be defective within the warranty period, Seller shall, in its sole discretion and as Customer’s sole and exclusive remedy, re-perform the defective System Services or issue a credit for such defective System Services.
    c. Labor for repairing and replacing any non-conforming Part shall be included by Seller during the Warranty Period if the System was purchased from and installed by Seller (“Labor Warranty”). Seller is not responsible for transportation, handling and shipping charges. The Labor Warranty does not apply if the underlying Parts Warranty terms are breached. In addition, the Labor Warranty for the Parts does not cover (i) damage caused by (a) misuse, vandals, accidents, improper installation (other than by Seller) or improper maintenance or (b) external factors such as fire, flood, animals, pests, insects, exposure to chemicals or other natural disasters; or (ii) repairs or alterations made by unauthorized persons. Unauthorized repairs or attempted repairs shall void the Parts Warranty and Labor Warranty entirely.
    d. All warranty claims shall be deemed waived by Customer unless submitted to Seller in writing within ten (10) days from the date Customer discovered, or should have discovered, the issue. Customer agrees to cooperate with Seller in processing all warranty claims for Goods and Parts with the manufacturer. EXCEPT FOR THE SPECIFIC WARRANTIES SET FORTH IN THIS SECTION, SELLER MAKES NO OTHER WARRANTIES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE GOODS, WORK, CUSTOMIZATION, C&S, SERVICES OR PERFORMANCE OF ITS OBLIGATIONS HEREUNDER, AND SPECIFICALLY DISCLAIMS ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SELLER SHALL NOT BE LIABLE FOR ANY DATA OR SECURITY BREACHES TO THE SYSTEM.
    e. The warranty set forth herein supersedes any other warranties contained in project or job plans, drawings or specifications on which a quotation or proposal from Seller may be based and cannot be expanded without the prior and specific written consent of the manufacturer of the Goods.
  13. Limitation of Liability: IN NO EVENT SHALL SELLER BE LIABLE TO CUSTOMER FOR ANY PUNITIVE, SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF DIRECT OR INDIRECT PROFITS, REVENUE, USE, OR BACK CHARGES, EVEN IF CUSTOMER OR ANY OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL SELLER’S AGGREGATE LIABILITY TO CUSTOMER EXCEED ALL AMOUNTS ACTUALLY PAID BY CUSTOMER TO SELLER FOR THE SPECIFIC GOODS, WORK, C&S, OR SERVICES THAT ARE THE SUBJECT OF THE CLAIM. CUSTOMER AGREES TO INDEMNIFY SELLER FOR ALL PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LIABILITY RESULTING FROM THE NEGLIGENCE OR WILLFUL MISCONDUCT OF CUSTOMER. The exclusions apply regardless of whether such damages are sought based on breach of warranty, breach of contract, negligence, strict liability in tort, or any other legal theory. In no event shall Seller be liable or responsible for the actions or omissions of Customer or its other contractors or third parties outside Seller’s control.
  14. Controlling Law: These Terms and all accepted orders shall be construed in accordance with the laws of the State of Colorado, without regard to its conflict of law principles. Customer agrees that all disputes with Seller, including contract and tort claims, shall be resolved in the state and federal courts situated in Colorado, and that these courts shall have the exclusive jurisdiction over all such disputes and Customer consents to the personal jurisdiction in these courts. Any action brought by Customer against Seller shall be within one (1) year after the cause of action arises or it shall be deemed forever waived.
  15. Confidentiality: Customer will not disclose to third persons any proprietary or confidential information of Seller concerning its business and operations, including without limitation, pricing information, for a period of five (5) years from the date such confidential information was learned or for confidential information meeting the definition of “trade secret” under applicable law, until such information is no longer a “trade secret.” The obligations of confidentiality do not apply to confidential information that becomes readily ascertainable by proper means by the public other than through breach of this Section by Customer.
  16. Additional Terms: The provisions of these Terms and the Sales Agreement, if any, constitute the entire agreement between Customer and Seller with respect to the matter contained herein and supersedes any prior oral or written communications, understanding, representations, proposals or agreements with respect to such subject matter. Seller may revise these Terms from time to time. These Terms may not be amended or modified by Customer unless agreed to in writing by Seller. Customer may not assign any of its rights or obligations hereunder or under any order. If any provision of these Terms or a Sales Agreement is invalid, unenforceable or in conflict with any law, such provision shall be deemed severed from these Terms and/or the Sales Agreement and the validity of the remainder of these Terms and/or the Sales Agreement shall not be affected thereby. The provisions of these Terms that by their nature are reasonably intended by the parties to survive the expiration or termination of the Terms or any accepted order, shall survive the expiration or termination of the Terms or any accepted order.